HEAT LIVE RELAX
GENERAL HEATER PARTS
CONTROL BUTTONS
HANDLE
AIR FILTER & INLET
AIR OUTLET
BASE
POWER SWITCH
BUTTON FUNCTIONS
GETTING STARTED
1. Carefully remove the heater from the plastic bag and the carton, and unwind the cord to its full length.
2. Place the heater onto a stable, flat and dry surface.
3. Turn the heater off (“O” on the power switch - see diagram above). Plug the cord set into a 230-240V~A.C.
50Hz electrical outlet. Turn the power on at the electrical outlet.
4. Turn the heater on (“-“ on the power switch – see diagram above). A ’beep’ sound and the blue LCD screen will
come on indicating that there is power to the unit. The heater is now ready for use. Refer to the operating
instructions section further in this manual for the full operation of your heater. The blue LCD screen will remain
lit until the power switch on the heater base is turned off and the heater is unplugged from the electrical outlet.
3
Temp + button
Timer button
Power button
Heat buttons
Oscillation Button
Control Buttons
Temp - button
