Everdure E2PCFLPC-08, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 20

THE EVOLUTION OF HEALTHY OUTDOOR COOKING
BARBECUE ASSEMBLY
The barbecue, hood and trolley come pre-assembled in a single package, but a number of components need
fitting to their correct position. For pictures of parts see the parts lists near the end of this booklet. For more
details regarding set-up, refer to the Everdure website, www.everdure.com.
2B MULT-E-PLATE
Place the 2B Mult-E-Plate (large tab to the front) on the inner lip of the barbecue chassis. The Plate must be
used in conjunction with either the 2B Health-E-Plate stainless steel grill insert & 2B Health-E-Plate flame tamer
insert or the 2B Health-E-Plate insert.
2B HEALTH-E-PLATE INSERT
Place the Health-E-Plate (flat edge to the front) inside the hole on the right hand side of the 2B Mult-E-Plate.
When not in use, place within the trolley.
2B HEALTH-E-PLATE STAINLESS STEEL GRILL INSERT & 2B HEALTH-E-PLATE FLAME TAMER INSERT
Place the Health-E-Plate flame tamer insert (drainage hole to the front) inside the hole on the right hand side
of the 2B Mult-E-Plate, and place the 2B Health-E-Plate stainless steel grill insert on top. When not in use,
place within the trolley.
WARMING RACK
The warming rack can be fitted into the slots of the rear hood inner panel via two tabs at the rear of each rack.
When not in use, the warming rack can be placed in the trolley.
TOOL STORAGE BIN AND CONDIMENTS CADDY
The tool storage bin and condiments caddy (with towel rail attached below) can be fitted to the inside of the
door by clipping the tabs at the rear of the bins into the slots on the door inner panel.
FAT TRAY FOIL TRAY
Each appliance is supplied with three foil trays for the fat tray. One is placed into the front centre section of
the fat tray (positioned in front of the supporting bracket). The spare foil trays can be stored in the trolley.
PACKAGING
Remove the securing ties holding the fat drain assembly in place. Remove all internal cartons and packaging
from within the barbecue/hood assembly. Remove all external packaging and remove the appliance from the
packaging base before operation.
11