![Everdure 4K Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/everdure/4k/4k_cooking-configuration-and-tips-manual_2442784020.webp)
20
Once preheated to this temperature, first scatter the ignited charcoal across the base, and reload
charcoal so that the base is evenly covered with one layer. Use the supplied charcoal tongs and wear
heat resistant gloves during this step.
Place the cast-iron grills with the higher stainless steel grills above, with the pizza stone on top. Place
the probe in the P1 position and rest on top of the pizza stone to measure the stone’s surface
temperature.
Shut hood and wait for the probe temperature of the pizza stone surface to reach 320-350°C/608-
662°F. Toggle between ambient temperatures by pressing the temperature icon on the 4K.
Once the pre-fermented dough is rested and portioned, lightly dust a clean working surface to roll out
the pizzas. Push the dough out with fingertips instead of a rolling pin, to keep some air in the crust.
Continue pushing and turning until a rim forms around the edges. Then, using the palms of your hands,
gently press down, stretching the dough in opposing directions. Continue until an even thickness of
1/5 inch is reached. Lightly sprinkle some semolina onto a pizza peel and place the dough on top (this
will make it easier for the dough to roll off).
Spread 2 tbsp of tomato passata onto the pizza base in a circular motion, and evenly scatter toppings.
Once the pizza stone has preheated 320-350°C/608-662°, slide the pizza onto the pizza stone and
close the hood.
Check after 3mins if pizza is ready and toppings melted, close hood and leave for a little longer if
required. The crust should be slightly puffy and the passata sauce bubbling.
For multiple pizzas, ensure the pizza stone is preheated to the target temperature with hood closed
before cooking the next one.