4PK 2” Caster Wheels
Installation Guide
1. Insert the wheel
Before installation the wheels, carefully flip over the
garden bed so that it lays flat with the long support
boards pointing towards the sky.
Pay attention to the
direction of wheel and
the carner post.
1a
1b
2. Insert the bolt
3. Turn on the nylon lock nut
Insert from inside to
outside.
2a
2b
4. Tighten the fasteners
Please use a 5mm hex
wrench and a 13mm
combination wrench
5. Assemble the
remaining wheels
using the same
method. The direction
of each wheel aligns
with the corner posts,
as shown in Pictures
1c and 5a.
4a
5a
4b
6. After installing two wheels, carefully flip over the
garden bed in the opposite direction, and install
another two wheels.
Model#: WK2K4
Questions or Comments?
Email us at [email protected]
Welcome to our website: www.everbloom-garden.com
Suggested tools
1. 5mm hex wrench, preferably with T-handle
2. 13mm combination wrench, preferably with ratchet
Install on Everbloom
ERB3332 Elevated Garden Bed
E333612 Elevated Deep Trough Garden Bed
Installation 1
1c
3a
3b
