HOMEDEPOT.COM
5
Please contact 1-877-297-6069 for further assistance.
Pre-Installation
PRODUCT DESCRIPTION
*The weep hole prevents the pump from becoming
“air-locked”, a condition which will not allow the pump to pump water.
Installation
1
Installing the basin
□ Remove the eight outer bolts
securing the cover to the basin and
set aside. Take the cover off the
basin.
□ Remove the contents from the
basin and remove the components
shown in the product description
above from their packaging.
□ Excavate a hole large enough to
accommodate
the
basin
(A),
backfill material (1) and inlet piping
(2).
□ Add 4 – 6 in. of clean sub-base
material or concrete (3) to the
bottom of the hole.
□ Assure that it is level, compacted,
and smooth.
□ Place the basin (A) in the hole and
ensure that it is level.
Part Description
A
Basin (with pump and
accessories inside)
B
Gas-tight Cover w/Pipe Flanges
and Cord Grommet
C
Everbilt Model HDSS50
1/2 HP Cast Iron Sewage Pump
D
2 in. Discharge Pipe Assembly
w/Weep Hole*
E
2 in. Compression Fit Check
Valve
F
4 in. Snap-In Inlet Hub
G
Reusable Seal
