background image

Read This First 

It is extremely important that you read this guide to get started with your EverAccess 
product. 

Unpacking 

Please be careful when you unpack the box due to the electronics devices contained 
inside. Check to make sure that you the original box contains the following items: 

 

Communication Server with 1 serial port    

 

1 power adapter: input voltage of  90~264VAC, output voltage 5V, current 2A  

 

1 Installation CD and 1 User’s Manual 

If an item appears to have been damaged in shipment, replace it properly in its carton 
and notify the shipper. If any items are missing, notify your Everfocus Electronics 
Corporation Sales Representative or Customer Service. The shipping carton is the 
safest container in which the unit may be transported. Save it for possible future use. 

Safety Warning 

 

To prevent fire or shock hazard, do not expose this equipment to the 
environment of high humidity and dust. So do not use it in an unprotected 
outdoor installation or any area classified as a wet area 

 

Installation environment: The temperature should be kept between 14°F  
~140°F 

 

For safety sake, do not disseminate the unit or put it on an unstable base 

 

Ventilation: openings in the enclosure are provided for ventilation and to 
ensure reliable operation of the unit and to protect it from overheating. These 
openings must not be blocked or covered. This unit should not be placed in a 
built-in installation unless proper ventilation is provided. 

 

Cleanse: unplug the unit from the outlet before cleansing. Do not use liquid 
cleaners or aerosol cleaners. Use a damp cloth to clean it. 

 

Overload. Do not overload outlets and extension cords as this may result in a 
fire or electric shock. 

 

Power-cord protection: Power-supply cords should be routed so that they are 
not likely to be walked on or pinched by items placed upon or against them, 
paying particular attention to cords at plugs, convenience receptacles, and the 
point where they exit from the appliance. 

 

Object and liquid Entry: Never push objects of any kind into this unit 
through openings as they may touch dangerous voltage points or short-out 

Preface 

Содержание EA-LAN1






















Отзывы: