Ever Duo II 1000, Инструкция по эксплуатации

Страница: 10 / 16

DUO II / DUO II Pro series UPS – Instruction Manual
2010/03/19
www.ever.eu
10
COMMUNICATION BETWEEN THE UPS AND A COMPUTER
DUO II Pro battery back-ups are equipped with a USB port enabling communication
of the UPS with a computer. The device is supplied with a CD-ROM featuring the
PowerSoft programme and a USB communication cable. In order to ensure proper
operation of the system, please install the PowerSoft programme first and then
connect the battery back-up to a free USB port on your computer with the supplied
communication cable. Connecting the battery back-up to the computer with the USB
cable before PowerSoft is installed will cause the Windows system to set default
drivers, which prevents communication of the UPS with the computer. If the
software is not installed while the connection is made, then random conditions
(PNP or others) may occur, which may lead to incorrect operation of the battery
back-up.
SOFTWARE INSTALLATION
INSTALLATION AND CONFIGURATION OF THE POWERSOFTPERSONAL
SOFTWARE
Installation on computers with Windows
Before beginning the installation of PowerSoft:
•
Uninstall the current version of PowerSoft or any other control software (in
situations where the user is changing the UPS protecting the computer),
•
If the UPS will communicate with the PC via a USB cable, this cable should be
initially disconnected from the computer. The software installer will prompt the
user to connect the communication cable at the appropriate time.
In order to install PowerSoft on a computer with Windows (the list of operating
systems compatible with the application is available at www.ever.eu) just run the
software installer and follow the instructions onscreen. During the installation you will
be asked to select the model of the UPS connected to the computer on which the
software is being installed. This setting may also be changed when the application is
running.
In the case of a UPS connected to the computer via a USB cable, when the
software installation is complete, the PowerSoft Personal installer will ask the user to
connect the USB cable to the computer. The system will announce that a new device
has been found and will propose to install the drivers. Select the option to install the
drivers from a chosen location and on the next screen indicate the installation folder