Ever Power Systems Sinline 1200, Инструкция по эксплуатации, Страница: 9 / 27

SINLINE series UPS – Instruction Manual
2010/01/26
www.ever.eu
9
ELECTRIC SAFETY
•
Never work alone in conditions that may be hazardous to health and/or life;
•
Even a momentary shorting of a strong current may lead to severe burns;
•
Prior to connecting the device to the mains inspect the condition of power cords,
plugs and sockets, as well as the condition of the device itself;
•
To minimise the risk of electric shock, in cases when there is no way of verifying
the earthing, the device should be disconnected from the mains before installation
or connection of other equipment to the battery module – reconnect the power
cord only after all connections are made;
•
To avoid the risk of electric shock when connecting and disconnecting signal
cables and touching two surfaces with differing electric potential, if possible use
only one hand;
•
The device must be plugged in to a 3-lead socket (two poles and earthing)
– connecting the device to any other socket may result in electric shock;
•
The device receiving the current must be connected with an appropriate circuit
protection (manual circuit breaker or circuit breaker);
•
A device powered via a cord with a plug has an earthing lead that carries away
the leakage current from the receivers (e.g. computer equipment) – the total
leakage current must not exceed 3.5mA.
Users are forbidden to carry out any maintenance activities, as they may lead to
injury or death. Any repairs and replacement of batteries should be conducted only
by a qualified representative of the technical support.
WARNING! The UPS is disconnected from the mains only when the
power cord is removed from its socket.
WARNING! Since the device is equipped with internal power source
(batteries) the output may provide current even though the device
itself is not connected to the mains.
WARNING! SINLINE and SINLINE RACK UPSs were not designed to
work with medical equipment, in particular life support devices.