Ever Power Systems Sinline 1200 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 27

Ever Power Systems Sinline 1200 Скачать руководство пользователя страница 11

SINLINE series UPS – Instruction Manual

2010/01/26

www.ever.eu

11

INSTALLATION OF THE SINLINE UPS – Rack Model

When choosing the installation spot you must take the device's weight into account.

Strength of the supporting cabinet/rack is the most important. The battery module

should only be used in rooms where dustiness, temperature and moisture levels

conform with the device's specification. In order to ensure correct operation of the

battery module, appropriate cooling conditions for the device must be provided. For

this reason the ventilation openings on the BACK-UP’Scase must be uncovered.

The battery module is designed for installation in a cabinet/rack. To facilitate

installation in cabinets/racks of various depth, the device is equipped with moving

handles which enable installation in racks with depth of up to 600 mm. If the battery

module is to be installed in a rack of 800-mm or 1000-mm depth it is possible to order

longer handles to adjust the product for installation in such a rack. To install the UPS

take the following steps:

1.

Remove the handles marked as "1" by sliding them out of the rear part of the

sides of the UPS.

2.

Install the battery module by screwing the front brackets "2" to the rack's frame.

3.

Supporting the BACK-UP’Sbase with hand, slide the handles "1" into the rear

part of the BACK-UP’Ssides.

4.

Move the handles "1" to the rack's frame and screw them down

«
...
9
10
11
12
13
...
»

Содержание Sinline 1200




























Отзывы:

Нет отзывов