Eventide INSTANT FLANGER MK II, Инструкция по эксплуатации

Страница: 12 / 14

2.7 Preset Bar
Located at the top of the Instant Flanger Mk II Plug-In, the Preset Bar lets you load and
save presets, along with several other features.
When Instant Flanger Mk II is installed, a library of settings is placed into the <user>/Mu-
sic/Eventide/Instant Flanger Mk II/Presets folder (Mac) or the <user>/Documents/Even-
tide/Instant Flanger Mk II/Presets folder (Windows). These presets have a .tide exten-
sion and can be saved or loaded from the Instant Flanger Mk II preset bar in any sup-
ported DAW.
In many DAWs there is an additional generic preset bar that saves DAW-specific presets
to a separate location. We recommend saving your presets using the Eventide preset
bar to ensure that your presets will be accessible from any DAW. You can also create
sub-folders inside the preset folders, if you wish.
Load Loads your .tide format presets.
Save Saves your presets in .tide format.
Compare Click to toggle between two different settings for the plug-in.
This is useful for making A/B comparisons.
Info Click this button to open this manual.
Mode As mentioned in Section 2.3 , the Eventide Clockworks Instant
Flanger had two unique outputs called Main and Aux. The Main
output used two bucket brigade devices in series, while the Aux
output only used a single Bucket Brigade. This means the delay
times of the Main output are roughly double that of the Aux out-
put. The Mode knob gives you access to which of these outputs
is used by the plug-in, and it can drastically change the sound.
For the stereo output versions of the plug-in, the options are
Shallow, Deep, and Wide. For the mono output version of the
plug-in, the options will only be Shallow and Deep. Shallow
means that all plug-in outputs will correspond to the Aux output
of the hardware unit. Deep means that all plug-in outputs will
correspond to the Main output of the hardware unit.
9