Eventide H9000, Руководство пользователя

Страница: 54 / 143

54
Trigger Source Options
Scenes can be triggered in the following ways:
Load By Number
Load By Number works like a traditional program change message: it will load
whatever Scene matches the number of the program change message you send,
between 1 and 128.
Although it usually makes sense to use actual MIDI Program Changes, you can also
use Note On or Continuous Controller triggers.
Increment/Decrement
Increment/Decrement switches the H9000 to the next or previous scene, but keeps
it in a pending state to be loaded later. The scene can then be loaded by using the
“Load Current” function.
Increment & Load/Decrement & Load: These functions switch the H9000 to the
next or previous scene and then load it immediately
Note: If your scenes are nicely sequenced, it’s probably easier to use the Increment
& Load/ Decrement & Load options. However, if you need to jump around or skip
Scenes, you can use Increment/Decrement with the Load Current option.
Note that if you are using Load By Number, the full range of:

Program Change

Note On

Continuous Controller messages
will be observed and used to determine which Scene to load.