Eventide 141242, Руководство пользователя

Страница: 22 / 132

MIDI THRU
The MIDI THRU connector accepts incoming MIDI signals from the MIDI DIN input and outputs a
mirrored duplicate of those signals. This allows you to daisy chain mul
ti ple MIDI devices.
Word Clock Input
This BNC connector allows the H9000 to sync its digital system clock to an incoming word clock
signal. It is compa
ti ble with word clock signals at 44.1kHz, 48kHz, 88.2kHz, and 96kHz.
Word Clock Output
This BNC connector outputs the H9000’s digital clock signal at the unit’s currently con fi gured
sample rate.
Op ti cal Input
The op ti cal input accepts 8 channels of ADAT format digital audio, or 2 channels of S/PDIF format
digital audio.
Op ti cal Output
The op ti cal output sends 8 channels of ADAT format digital audio, or 2 channels of S/PDIF format
digital audio. The op ti cal connectors only support sample rates of 44.1kHz and 48kHz; they are not
opera ti onal when the H9000 is set to run at higher sample rates of 88.2kHz or 96kHz.
Expansion A,B,C
These 3 slots allow for op ti onal expansion cards detailed in Sec ti on 7: Expansion Cards.
18.
19.
20.
21.
22.
23.
22
2. HARDWARE