EVEN
GLO
Model
No.
GA201M
Page
21
Rev.
Nov/09/2010
Installation Instructions
Secure the Heater
1.
Ensure that the Base Brackets are properly installed as described in Installation Step 3.
2.
The type of Foundation Fastener required depends on the type of Floor / Ground that the Heater is
located upon. Prepare the Floor / Ground as detailed in Table A, at all three bracket locations.
(Ensure that alignment with the connecting hole(s) of the Base Bracket is maintained.)
Insert / Connect the three Foundation Fasteners as detailed in Table A.
Foundation
Fastener
Floor / Ground
Type
Foundation Fastener
Type & Size
Mounting Method Summary
Floor / Ground
Preparation
Concrete
Concrete Anchor
Ø
8mm x 65mm
EN12 B14
Place Anchors into pilot holes
aligned with Base Brackets -
tap / hammer lightly, screw
fastener into anchor
Drill 3 - Pilot Holes
Pilot hole drill size:
Concrete = 14mm
Wood Deck
Wood Screw
#10 x 1
1
/
2
"
Secure using Wood Screws in
pilot holes aligned with Base
Brackets
Drill 3 - Pilot Holes
Pilot hole drill size:
Hardwood = 7/64"
Softwood = 3/32"
Table A:
Methods for Securing Heater to Floor / Ground
alfresco-heating.com
888-Warm-Glo
