background image

11

NOTE:

 If the temperature measurement is 100.4°F (38°C) 

or above, the Frowning Face and Red Backlight will be 

accompanied by a Fever Alarm. This Fever Alarm will only 

occur in Body Temperature Mode. The Fever Alarm will not 

occur in Body Temperature Night Mode.

7. 

About 60 seconds after use, the thermometer will 

automatically beep and shut off.

Measuring Food/Liquid Temperature

1. 

Press the Power Button to turn the thermometer on. All 

symbols on the display will momentarily appear.

2.  Press the Mode button on the side of the thermometer until 

the “

” symbol appears on the display.

3.  Position the thermometer approximately 1 inch (2.5 cm) 

from the food or liquid to be measured, then press and 

release the Power Button.

4.  Slowly move the thermometer toward or away from the 

food/liquid until you have reached the correct distance. 

When the temperature reading is complete, you will hear a 

short beep. The temperature will 

ALWAYS

 display on the 

LED with a Green Backlight 

regardless of temperature 

reading

.

NOTE:

 When using the thermometer in Food/Liquid 

Temperature Mode, the device does not provide an alert if 

a temperature reading is too hot or too cold. Please ensure 

that any food or liquid is at a safe temperature for use by 

your child. 

5.  About 60 seconds after use, the thermometer will 

automatically beep and shut off.

Содержание PreciseRead 60321000





















Отзывы: