3
!SSEMBLINGTHE%XER3AUCER
5.
Locate three lower legs
M
and the base
N
. Align the
tabs
O
on the lower legs with the slots in the base,
then snap the lower legs onto the base. Repeat for all
three lower legs.
.OTE
Make sure the tabs on the lower legs have
locked completely into the base, as shown, by moving
the legs from side-to-side. If they are not completely
locked in place, repeat this step until they are locked
securely.
N
O
O
O
O
N
6.
Locate the tray
L
and three spring domes
P
.
Place each spring dome onto the tray over a leg open-
ing, as shown. Press the spring dome downward while
turning until it locks into place.
)FYOUDONTLINEUPTHEALIGNMENTGUIDESPROPERLYTHESPRING
DOMEMAYCOMEOFFOFTHETRAYANDCAUSEINJURY
7!2.).'
Make sure the alignment guides
Q
line up properly, as
shown.
P
P
P
P
L
Q
7.
Turn the tray over and place three large springs
R
into
the center of each spring dome
P
.
R
R
R
P
M
