Using the Activity Lights
Press either of the two activity
lights
A
on each side of the
headrest to turn on or off.
22
23
A
+
+
+
+
+
+
+
+
+
+
+
+
To install batteries for the activity lights and speak-
ers
, remove screw
A
and battery door
B
, install bat-
teries as shown, then replace battery door and screw.
&ORBESTPERFORMANCE%VENmORECOMMENDSINSTALLING
new lithium batteries.
A
B
Using the Speakers
A
1.
Press the amplifier switch
A
on the left side of the
headrest to turn the amplifier on.
2.
Connect the speaker cord plug
B
on the left side
of the base to the headphone jack on the hand-held
music player (not supplied) you intend to use.
Note:
The booster seat does not have control of music
volume. Music volume can be controlled only by adjust-
ing the volume level on the music player.
C
B
Installing the Batteries
Note:
s)FTHEACTIVITYLIGHTSDIMWHILEMUSICISPLAYINGTHROUGH
the speakers, your batteries may need to be replaced.
s
To prolong battery life, do not use the speakers and the
lights at the same time. Doing so will drain the batteries
more quickly.
s
Dispose of old batteries properly.
Properly secure the hand-held music player in the storage
C
during travel. If a crash occurs, an unsecured
music player may act as a projectile and injure someone.
WARNING
s
DO NOT
mix old and new batteries.
s
DO NOT
mix alkaline, lithium, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
s 2EMOVEBATTERIESBEFORESTORINGUNITFORAPROLONGED
period of time.
s
DO NOT
allow unit to get wet.
WARNING
Autogoods “130”
130.com.ua