E
D
A
1.
Remove the shoulder
belt clip harness
A
from
the storage area
B
be-
neath the booster
C
.
Note:
Be sure to remove
rubber band around
the strap and dispose of
properly.
2.
Place booster
C
on the
vehicle seat and attach
the shoulder belt clip
A
to the shoulder belt
D
.
3.
Pull the adjustment
strap
E
until belt clip
A
is even with the
child’s shoulder and the
shoulder belt
D
lays
across the child’s chest
midway between his/
her shoulder and neck.
Using the Amp Shoulder Belt Clip
12
13
4.
To store the shoulder
belt clip harness, fold it
and place it in the stor-
age area
B
.
A
C
B
B
C
A
1.
Thread the looped end
of the shoulder belt clip
strap
A
through the an-
chor point on the back
of the booster
B
.
3.
Place booster
B
on the
vehicle seat and attach
the shoulder belt clip
C
to the vehicle shoul-
der belt
D
.
4.
Pull the adjustment
strap
E
until belt clip
C
is even with the
child’s shoulder and the
vehicle shoulder belt
D
lays across the child’s
chest midway between
his/her shoulder and
neck.
C
A
B
D
The use of the shoulder belt clip will depend
on the model of booster seat you have, as
shown below.
Model 1
Model 2
Model 1
Model 2
C
A
D
2.
Thread the shoulder
belt clip
C
through the
loop at the end of the
strap
A
and pull until
tight.
E
D
C
C
B
