evenes Gelbi D 4.2, Руководство по эксплуатации и сборке

Страница: 28 / 32

28
15. Technical data
Scope
External temperature °C min: +5 /max 43
The temperature of hot water with the heat pump °C max 60
The temperature of the hot water with the electrical
heater.
°C
75
Minimum assembly area m
2
1
Heat transfer fluid - Water or water and glycol mix
Electrical parameters
Electrical power supply 1/N/PE 220-240V/50Hz
Recommended security C8
Max. starting electricity of the heat pump A 30
Max. work electricity of the heat pump A 6,5
Power of absorb
fan
W
90
circulation pump Max 55
Energy consumption for inlet air temperature of 20°C kW min. 0,55, maks. 1,1
Performance
Energy efficiency class - A+
Load profile - XL
Sound power level dB(A) 57
Maximum heating capacity for drawn air temperature of
20°C
kW 3,6
Average heating capacity for drawn air temperature of
20°C and water heating from 10 to 55 °C
kW 3,1
COP, water heating 10-40°C 4,9
COP, water heating 10-45°C 4,3
COP, water heating 10-50°C 4,0
COP, water heating 10-55°C 3,9
Heating water at 10-40°C 3h:05min
Heating water at 10-45°C 3h:50min
Heating water at 10-50°C 4h:25min
Heating water at 10-55°C 4h:55min
Working factor
Compressor type rotary
Type of the air-compressor oil ESTER OIL VG74/480 ml
Refrigerant/ quantity HFC-134a/0,80kg
GPW factor 1430
Equivalent CO2 t 1,14
Maximum permissible pressure (low pressure) bar 4,7
Maximum permissible pressure (high pressure) bar 24
Dimensions
Diameter mm 670
Height mm 500
Weight kg 50
Heating circuit parameters
Connectors for the heating circuit 2xGW
3
/
4
"
Minimum tube inside diameter mm 20
Flow m
3
/h 0,33÷0,35
Heat transfer fluid water/propylene glycol
The above values of COP and heating times were tested in the following conditions: Inlet air temperature: 20°C. The pump
was connected to the water tank 300l. In different conditions the above values may change.