9
EN
6. Assembly
Safety notice:
After assembly, check that all screws and nuts are tightened.
Rear mudguard / reflector
Mount the mudguard [B] to the mudguard bracket
using 4 screws (fig.27, fig.28, fig.29).
Insert the reflector [N] through the reflector holder
on the mudguard and fasten it with a nut (fig.30).
fig.28
fig.27
fig.30
fig.29
Mounting the seat / saddle
Insert the seat post [J] into the seat post bracket on
the running board (fig.31).
Secure the seat post with the safety bolt [K] (fig.32).
Place the saddle [L] on the seat post [J], align the
saddle and then tighten the saddle bolt (fig.33,
fig.34).
fig.32
fig.31
fig.34
fig.33
