7
EN
6. Assembly
Erecting the steering column
Push the single-lever clamp down (fig.11, fig.12).
Align the steering column until it locks into place
(fig.13, fig.14).
fig.4
fig.3
Assembling the front wheel
Insert the front axle [E] through the first fork half way
through as shown. Slide the sleeve [E1] over the
front axle (fig.7).
Then place the front wheel between the two fork
halves. Make sure that the brake disc is correctly
fitted. Now push the front axle through the front
wheel (fig.8).
Push the sleeve [E2] over the front axle and push it
through the second fork half (fig.9).
Now screw the nut onto the front axle and tighten it
firmly with a wrench (fig.10).
fig.12
fig.11
Aligning the front wheel fork
Remove the retention bolt from the shock absorber
holder on the front shock absorber (fig.1).
Fold the suspension fork in the direction of the shock
absorber holder (fig.2). Ensure that the suspension
fork joints are aligned upwards (fig.3, fig.4).
Now push the retention bolt removed earlier through
the suspension fork again (fig.5).
Tighten the nut. (fig.6).
Tip:
For easier front wheel mounting, tighten the nut
by hand only and tighten with a wrench only after
inserting the front wheel.
fig.14
fig.13
fig.6
fig.5
fig.8
fig.7
fig.10
fig.9
fig.2
fig.1
