EVE WOLF, Руководство по эксплуатации

Страница: 5 / 12

5
Before cleaning your oven, or performing maintenance, disconnect it from the power supply .
To extend the life of your oven, it must be cleaned frequently, keeping in mind that :
•
the enameled or stainless steel parts should be washed with lukewarm water without using
any abrasive powders or corrosive substances which could ruin them ;Stainless steel could
get stained
. If these stains are difficult to remove, use special products available on the
market . After cleaning, it is advisable to rinse thoroughly and dry .
•
the inside of the oven should preferably be cleaned immediately after use ,when it is still
warm ,with hot water and soap ;The soap should be rinsed away and the interior dried
thoroughly
. Avoid using abrasive detergents ( for example cleaning powders, etc ) and
abrasive sponges for dishes or acids ( such as lime scale – remover, etc …) as these could
damage the enamel . If the grease spots and dirt are particularly tough to remove, use a
special product for oven cleaning, following the instructions provided on the packet . Never
use a steam cleaner for cleaning inside of oven .
•
if you use your oven for an extended period of time, condensation may form . Dry it using a
soft cloth .
•
there is a rubber seal surrounding the oven opening which guarantees its perfect
functioning. Check the condition of this seal on a regular basis
. If necessary, clean it and
avoid using abrasive products or objects to do so . Should it become damaged, please
contacts
•
never line the oven bottom with aluminum foil ,as the consequent accumulation of heat
could compromise the cooking and even damage the enamel
.
•
clean the glass door using non - abrasive products or sponges and dry it with a soft cloth .
For a more thorough clean, you can remove the oven door . Choose the remove and
assemble method . Proceed as follows :
Oven door structures 1 remove and assemble procedure :
· Open the door to the full extent ( fig . 1 ) ;
· Open the lever A completely on the left and right hinges ( fig . 2 ) ;
· Hold the door as shown in fig . 3
· Gently close the door ( fig . 3 ) until left and right hinge levers A are hooked to part B of the
door ( fig . 4 ).
· withdraw the hinge hooks from their location following arrow C ( fig . 4 ) ;
· Rest the door on a soft surface;
· To replace the door, repeat the above steps in reverse order
.
CLEANING AND MAINTENANCE
HOW TO REMOVE THE OVEN DOOR