6
3. Install the hook on a suitable place once the installation height is fixed, and keep it
in line. The fixed position of the inside chimney bracket is the highest place of
chimney. See pic 2.
4. Fix the outlet on the hood with 4pcs ST4*8mm screws. Then install the expansion
pipe onto the outlet and fix it with a cable tie. Put the cooker hood on the hook. See pic
3.
5. Fix the outside chimney bracket onto the outside chimney with 2 pcs ST4*8mm
screws, here should be sure the inside chimney can be flexed freely inside. Put the
two chimneys together onto the cooker hood body, meanwhile,lead the expansion pipe
outside of the room. Finally, fix the body with safety screws. Note: The two safety
vents are positioned on the back housing, with a diameter of 6mm.See Pic 4.
