12
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
Note:
⚫
Before changing the lights, make sure that the appliance is turned off and
unplugged.
⚫
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
➢
Remove the grease filter.
➢
Put the lamp outwards by hand, remove the wire terminal to replace the lights.
➢
Apply the reverse procedure to reinstall the lights.
•
ILCOS D code for this lamp is:
DSR-1.5/65-S-64
– Lamp modules –round lamp
– Max wattage: 2
×
1.5W
– Voltage range: DC 12V
– Dimensions:
