EVCO S.p.A.
Vcolor 338 S
| Installer manual ver. 1.2 | Code 144VC338SE124
page 48 of 52
18
TECHNICAL DATA
18.1
Technical data
Purpose of the command device:
operating command device.
Construction of the command device:
built-in electronic device.
Case:
user interface
control module
black self-extinguishing.
board without cover.
Dimensions:
user interface
control module
94.5 x 128.0 x 30.7 mm (3.720 x
5.039 x 3.068 cm; L x H x D).
166.0 x 116.0 x 44.0 mm (6.535 x
4.566 x 4.399 cm; L x H x D).
Method of mounting the command device:
user interface
control module
behind panel, with studs or on the
panel (front), with self-tapping screws
and frame.
on flat surface, with spacers.
Protection rating:
user interface
control module
IP40; IP65 in the case of installation
on panel with gasket 0027000007 (to
be ordered separately) for IEC; type
1 enclosure for UL and CSA.
IP00.
Connections:
user interface
control module
removable
screw
terminal
board
(control
module),
USB
type
A
connector (USB port). Nominal cross
section of cables 28 ÷ 16 AWG, screw
torque 2,2 lb-in.
removable screw terminal board (user
interface,
power
supply,
inputs,
outputs and RS-485 MODBUS port).
The maximum length of the analogue inputs and analogue output connection
cables must be less than 10 m (32,808 ft).
The maximum length of the user interface-control module connection cables
must be less than 10 m (32,808 ft).
Operating temperature:
from 0 to 55 °C (from 32 to 131 °F).
Storage temperature:
from -10 to 70 °C (from 14 to 158 °F).
Humidity for use:
from 10% to 90 % relative humidity without condensate.
Command device pollution situation:
2.
