EVBox HomeLine H116 Series, Руководство по установке, Страница: 9 / 18

9
Pedro de Medinalaan 31
1086 XP Amsterdam
The Netherlands info@ev-box.com
+31 (0)88 77 55 444
www.ev-box.com
IBAN: NL89RABO0153495715
SWIFT/BIC: RABONL2U
Chamber of Commerce:
32165082
VAT:
821785795B01
• Ensure that there is always adequate free space (at least 20cm) around the charging station
for ventilation purposes.
Location
Position the charging station, where possible, in surroundings not subject to extreme sunlight
and where damage from outside cannot occur. The charging station can be installed on the
stainless steel pole with bracket supplied with the charging station. The power supply cable
enters through the bottom of the pole.
The other option is to mount it onto a sturdy wall between 90cm and 120cm from ground
level. The supply line is fed through a cablegland at the lower side of the aluminium base
plate or the hole on the back side.
Power supply cable
The charging station is furnished with one 16A or 32A socket. There is
no protective residual current device or circuit breaker in the charging
station. The power supply cable is fed through a removable opening
for a connection to the lower side (figure 2). Alternatively the power
supply cable can be inserted through a removable opening in the
backside of the unit (figure 3).
It is important to use a separate cable for the electrical distribution
board, the main power supply cable must be fitted with a MCB/RCB
taking into account de-rating according to IEC61439-2. The
appropriate wire gauge of the supply cable depends on the power
rating and the distance between meter cabinet and charging station.
The voltage drop must not exceed 5%, it is advisable to take into
account a maximum allowable voltage drop of 3%. The maximum wire gauge that can be
fitted is 10mm
2 .
Installing the charging station
• Before starting installation switch off power supply in the
distributor and in the charging station.
• Secure the work environment to ensure that the power supply
can’t be switched on unintentionally.
Wall mounting
• Choose a flat vertical mounting surface, with a clearance of 20cm
around the charging station for ventilation purposes. Mount the
charging station on the wall with properly dimensioned
mounting material suitable for > 40kg. Check the contents of
the package and all accessories for damages once the delivery is completed.
Figure 2
Figure 3
Figure 4