GENERAL USE
Make sure that your electrical system complies with safety standards.
Check that the selector knob is on «O » before plugging in the appliance.
Place the appliance on a stable, heat-resistant surface.
Make sure that you do not block air intakes or exhausts in any manner.
The minimum distance between the air inlet and the nearest wall must bee 20 cm.
The distance between the air outlet and the nearest wall must be 1m.
The control lamp lights on when the appliance is operated.
SELECTOR KNOB
SETTING THE TEMPERATURE
Turn the thermostat on the maximum temperature. The control lamp lights on.
The thermostat allows you to adjust the room temperature.
If you turn down the thermostat, it is normal that the appliance stops working at
one point, and the control lamp will still be on.
Increase the temperature and the appliance will blow out air again.
