EVAPCO ESW4, Инструкция по сборке и монтажу

Страница: 16 / 16

EVAPCO, Inc. • P.O. Box 1300 • Westminster, MD 21158 USA
P
HONE
: 410-756-2600 • F
AX
: 410-756-6450 • E-
MAIL
: marketing@evapco.com
©2020 EVAPCO, Inc.
Printed on recycled paper
using soy-based ink
Accessories can ship in a variety of locations depending on the type of accessory, the size of the unit and the other accessories
purchased with the unit. See Table 7 for a guide to accessory location.
Unit Accessories Shipping Location
Aluminum Ladder Shipping Location is Unit and Accessory Dependent
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Shipped Separately on Truck Bed
Drip Channels for Multi Cell Units Strapped Inside Unit Basin
Discharge Attenuation Mounted Loosely Bolted on Basin Section
Shipping Location is Unit Dependent
Electric Basin Heater - End Mounted Heater: Installed in Unit Basin
- Side Mounted Heater: Strapped Inside Basin Section
Shipping Location is Dependent on Control Panel Size
Electric Basin Heater Control Panel - If Space is Available: Mounted on Unit Basin
- If No Space is Available: Boxed, Wrapped and Wire Tied Inside Basin Section
Electric Basin Heater Low Water Cutout Shipped in Rigging Box
Shipping Location is Unit Dependent
Electric Basin Heater Thermostat - End Mounted Thermostat: Mounted on Basin Section
- Side Mounted Thermostat: Shipped in Rigging Box
Electronic Water Level Control Probes Mounted in PVC standpipe
Electronic Water Level Control PVC Standpipe Strapped Inside Unit Basin
Shipping Location is Unit and Accessory Dependent
External Service Platform with Ladder - If Space is Available: Strapped Inside Basin Section
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Factory Mounted Crossover Piping Welded to Coil Connections
Fan Motor Shipped Loose on 8.5’ (2.6m) Wide Units
Shipping Location is Unit and Accessory Dependent
Fan Screens (If not mounted) - If Space is Available: Strapped Inside Basin Sections
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Shipping Location is Unit and Accessory Dependent
Fan Screen Supports (If not mounted) - If Space is Available: Strapped Inside Basin Section
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Hot Water or Steam Coil Installed in Unit Basin
Low Water Cutoff for Pump Shipped in Rigging Box
Shipping Location is Unit and Accessory Dependent
Motor Davit and Base - If Space is Available: Strapped Inside Basin Section
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Remote Sump Trash Screen Installed In Unit Basin
Rigging Hardware Shipped in Rigging Box
Safety Cage Attached to the Ladder
Sealer Tape Shipped in Rigging Box
Sump Sweeper Piping with and without
High Flow Eductors
Installed in Unit Basin
Vibration Switch Mounted in Fan Section
Water Level Indicator Strapped Inside Unit Basin
Table 7 – Unit Accessory Shipping Location