Evalue Technology ESM-2850 Скачать руководство пользователя страница 11

Страница: 11 / 91

User’s Manual

ESM-2850 User’s Manual

1.4 Manual Objectives

This manual describes in detail the Evalue Technology ESM-2850 series Single Board.

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved to

be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to interface

with ESM-2850 series or change the standard configurations. Whilst all the necessary

information is available in this manual we would recommend that unless you are confident,

you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see the

description of the Jumper Settings for details).

If you have any suggestions or find any errors concerning this manual and want to inform

us of these, please contact our Customer Service department with the relevant details.

Содержание ESM-2850




























































































Результаты поиска

Содержание ESM-2850

Отзывы:

Похожие инструкции для ESM-2850

Бренды по названию

Популярные бренды

Evalue Technology ESM-2850, Руководство пользователя

Результаты поиска

Содержание ESM-2850

Отзывы:

Похожие инструкции для ESM-2850

Бренды по названию

Популярные бренды