EvaKool TMX35, Инструкция по эксплуатации, Страница: 6 / 12

6
Display Panel
Using the Fridge
•
To Turn On:
Plug in the DC or AC power cable . The LED display on the control panel will
light up and the interior temperature will be displayed .
• Note: If the unit is off, only an orange LED will be illuminated . To turn on your unit please
hold the button down until the power LED changes to green and the LED display is
illuminated .
•
Setting the Temperature:
Press
SET
once and then the display will flash then press the
and buttons to adjust the temperature . Press the button to increase and the
button to decrease the temperature . The temperature will flash three times before
automatically setting in place . The display board will display the current temperature
inside the unit after the target temperature is set . After approximately 5 minutes the
displayed temperature will start to decrease .
•
Temperature setting range:
-20°C to +10°C, 4°F to +50°F .
• To change the fridge between °C a °F . Press
SET
twice and then or to change the
setting . Press
SET
again to lock this in .
•
Changing battery voltage protection:
To change the battery voltage setting press the
SET
button three times and then use the or to change the setting . Press
SET
once
to lock this in . The three voltage settings are as follows : (Evakool recommends you keep
the setting on LO) .
LO – 10 .4 Volts
NE – 11 .2 Volts
HI – 12 Volts
+/- Buttons
On/Off
Button
Set
Button
Digital
Display
Error
LED
Power
LED
TRAVELMATE
XTREME