User Manual - EVAstream with Piezo control V21.1
9
EVAstream Fixed Speed Mode
Button 1
Button 2
Button 3
EVAstream
STEP 1: Activate the system
Press button 2 = The 3 buttons flash, system is
activated.
STEP 2: Select the User
Press button 1 = USER 1
Press button 2 = USER 2
Press button 3 = USER 3
With speed auto-memory function per user
STEP 3: Fixed Speed Mode
The 3 buttons flash for 5 seconds. Wait until the flashing
stops and the EVAstream will automatically switch to
Fixed Speed Mode. The auto memory function starts the
machine at the last selected speed for the currently
selected user (see STEP 2).
Optional in the Fixed Speed Mode
Press button 1 = SPEED DOWN
Press button 2 = PAUSE/STANDBY
Press button 3 = SPEED UP
Back to the start menu = Button 2 (STANDBY)
Button
1 (OFF)
Start (again) at STEP 1
Underwater lighting
Button 1
Button 2
Button 3
Operating the underwater lighting
Press Buttons 1 & 3 simultaneously = run through fixed
underwater lighting program (repeating sequence):
Colour 1, Colour 2, Colour 3, etc…, LIGHTING OFF
(various pre-programmed colours available)
Repeatedly pressing both buttons simultaneously selects
the next colour in the sequence, finally switching the
lighting off at the end of the sequence.
When ON:
Pressing button 1 & 2 simultaneously = LIGHT INTENSITY -
When ON:
Pressing button 2 & 3 simultaneously = LIGHT INT
