Instruction Manual
CyberComm pH 1100/ 2100
5
3
CYBERCOMM PRO MAIN MENU
Figure 5: CyberComm Main Menu
See
Figure 5
. Select Communications Settings and set the appropriate requirements before connecting the
meter.
3.1
Communication Settings (File)
See
Figure 6
.
To make changes, use the drop-down menu of each parameter to set to desired values to match the meter’s
settings. After selecting proper communication parameters, select
OK
button to proceed. Otherwise click
CANCEL
if no change is made. To restore to factory default settings, click onto the
Restore Defaults
.
Figure 6
: Communications Settings
a) Connect
Using
Select COM Port from the drop down menu;
1, 2, 3, 4
or
5
depending on port connected to meter.
b) Baud
Rate
Select Baud Rate from the drop down menu.
4800
,
9600, 19200 and 38400.
c) Parity
Select Parity from the drop down menu:
None (0), Odd (1)
or
Even (2).
d) Stop
Bits
Select Stop Bits from the drop down menu;
1 or 2
.