Instruction Manual
CyberComm pH 1100/ 2100
2
2
INSTALLATION OF CYBERCOMM DATA ACQUISITION SOFTWARE (DAS)
2.1
Loading of CD-ROM
See
Figure 1
.
Before running the program, check that the pH 1100/ pH 2100 meter is properly connected to the computer.
It is preferable to connect to either one of the COM (serial) ports available on a computer. Note the number
of the COM port that you have connected to the meter as this will be required in setting up the CyberComm
DAS later.
a) Turn on the computer (PC).
b) Insert
the
CD-ROM
provided into a CD-ROM drive of your PC.
c) To install the DAS, use the
My Computer
to view the file contents in your CD_ROM drive. Locate and
click onto the
SETUP
file under the CyberComm directory. Double-click again on this file and the
program automatically starts installation. Alternatively you can use the Add/Remove Programs feature in
Control Panel to install the CyberComm and follow the instruction accordingly. If in doubt, please refer to
your Microsoft Operating Manual for further details.
Figure 1
: CyberComm Pro Installation/ Welcome Screen