EUTECH INSTRUMENTS ?lpha-pH550 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 44

EUTECH INSTRUMENTS ?lpha-pH550 Скачать руководство пользователя страница 8

Instruction Manual

α

lpha-pH 550

Eutech Instruments

2

1.3 Safety Instructions

- The

α

lpha pH 550 Monitor should be installed and operated only by

personnel familiar with the instrument and who are qualified for
such work.

- A defective pH Monitor must neither be installed nor put into service.

- The

α

lpha pH 550 must only be operated under the specified

operating conditions (see section 6).

- The

α

lpha pH 550 must not be repaired by the customer.

- No modifications to the

α

lpha pH 550 are allowed. The

manufacturer/supplier accepts no responsibility for damage
caused by unauthorized modifications. The risk is borne entirely
by the user.

1.4 Taking Out of Service / Correct Disposal of the Unit

Taking out of Service

•

First disconnect the unit from the power supply and then undo all electrical

connections.

•

Remove the unit from the wall / panel.

Correct Disposal of the Instrument

When the

α

lpha pH 550 Monitor is permanently taken out of service, obey

the local environmental regulations for correct disposal or send the
instrument to your local distributor, they will take care of proper disposal.

«
...
6
7
8
9
10
...
»

Содержание ?lpha-pH550













































Отзывы:

Нет отзывов