Instruction Manual
CyberScan DO5000
42
5.4
Select Auto Read Mode (Only available in D.O. mode)
Current MODE
Select
D.O. Auto Read Mode
enter
AUTO
MAN
You can use this meter when the Auto Read Mode function is active
or when it is inactive. When the Auto Read function is active, the
meter will lock onto a reading when the meter recognises it as stable.
The meter will not deviate from this reading until
meas
is touched. If
the auto Read function is inactive, then the meter will continuously
monitor the DO of the sample and the Measure screen display will
indicate any fluctuation that reading.
To Select Auto Read Mode
1. Access the Select Auto Read Mode screen from the DO Setup
screen. The current Read Mode id displayed on the screen.
2. Touch
AUTO
or
MAN
to choose the desired read mode.
3. Touch
enter
to accept the read mode and return to the DO setup
screen.
OR
4. Touch exit to return to the DO Setup Screen, without making any
changes.