manualshive.com logo in svg

EUTECH INSTRUMENTS CyberScan DO 5000, Инструкция по эксплуатации, Страница: 35 / 105

Поделиться
Скачать
EUTECH INSTRUMENTS CyberScan DO 5000 Скачать руководство пользователя страница 35

Instruction Manual 

 

 CyberScan DO5000

 

 

 

 

 

32

This option allows you to change the contrast on the screen to 
improve the readability of the information presented on the screen. 
The numbering system that appears on the screen is from 0 to 25. 
The darkest setting is 0 and the lightest setting is 25. 
 

To Set Display Contrast 
 

1.  Access the Set Display Contrast screen from the System Setup 

screen. The current display contrast value is displayed on the 
screen. 
 

2. Use 

the 

lighter

 or 

darker

 button to adjust the contrast of the 

screen to the desired level. 
 

3. Touch 

save

 to accept the contrast setting and return to the 

System Setup screen. 

 

OR 

 
Touch 

exit

 to return to the System Setup screen, without making 

any changes. 

 
 
 

 

The display contrast of the screen is affected by the internal 
temperature of the meter. The meter will warn up after being plugged 
in. during this period (approximately 20 minutes), the display contrast 
of the screen will get lighter. You may need to adjust the contrast 
during this period to meet your specifications. 
 

 

Содержание CyberScan DO 5000










































































































Отзывы:

Нет отзывов