- 1 -
1
INTRODUCTION
Thank you for purchasing the
α
lpha pH 190
⅛
DIN pH/ORP Controller. This
controller is part of a series of quality process controllers available from Eutech
Instruments. These sturdy, economical pH/ORP controllers are designed with the
features and reliability of a much more expensive instrument.
Your controller includes:
•
Removable terminal blocks for easy connections;
•
Two mounting brackets for easy panel mounting;
When shipped, the controller is set to the pH mode. See Setup program P3.1 for
directions on selecting ORP mode.
Some features of this controller are:
•
Two set points, two SPDT relay operation
•
Scrolling, 14-segment LED guides user easily through setup functions
•
Reliable power supply from 85 to 260 V AC, 50/60 Hz or DC withstands
voltage fluctuations
•
Push-button operation from the front panel
•
Two-point pH calibration, offset temperature and ORP calibration
•
Adjustable hysteresis band prevents rapid contact switching near set-point
•
Selectable automatic or manual temperature compensation
•
Two-level password protection
•
Removable terminal strips for quick and easy connections
•
Built-in non volatile memory retains setup even if power fails, and lets you
configure unit before installation
•
Isolated 4-20 mA output for remote monitoring or hard copy recording
