Eusso Wireless-N 4-Port Router Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 85

background image

- 43 -

Configure the PPTP connection and click the

Apply

button to put the new settings into effect.

See the table below for a description of the parameters configured for the connection.

PPTP Parameters

Description

IP Address

Type the IP address supplied by your ISP.

Subnet Mask

Type the Subnet mask supplied by your ISP.

Gateway

The gateway IP address is used provide access to resources outside your IP
Subnet or ISP’s network. Type the gateway IP address given to you by your ISP.

DNS

This entry is for the IP address of your primary domain name server, which
should also be provided to you by your ISP.

Server IP/Name

Enter the Server IP address for this protocol into this field. This is the IP address
of the server computer that will be used, along with your computer, to create the
Virtual Private Network. This field must be completed for both the Dynamic IP and
Static IP options

PPTP Account

Enter the PPTP account name, provided to you by your ISP, here.

PPTP Password

Enter your password for this PPTP account here, as stated to you by your ISP.

PPTP Confirm

Password

Retype the password entered in the

PPTP Password

field.

Maximum Idle Time

A value of 0 in this field means that the PPTP connection will remain connected.
If your network account is billed according to the amount of time the router is
actually connected to the Internet, enter an appropriate Idle Time value (in
seconds). This will disconnect the router after the WAN connection has been idle
for the amount of time specified. The default value = 5.

MTU

This field refers to the Maximum Transfer Unit, which is the maximum size of a
packet, in bytes, that will be accepted by the router. The default setting is 1500
bytes. This field should not be altered unless instructed by your ISP.

Connect Mode Select

This function, with

Connect-on-demand

selected, will allow the router to connect

any workstation on your LAN to the Internet upon request. If this function is set at

Always-on

, no request from the workstation will be needed to connect to the

Internet. If

Manual

is selected, it will be necessary for the workstation on the LAN

to manually connect to the Internet through this router.

«
...
48
49
50
51
52
...
»

Содержание Wireless-N 4-Port Router






















































































Отзывы:

Нет отзывов

Похожие инструкции для Wireless-N 4-Port Router

Бренд: H3C Страницы: 1057

Бренд: Aastra Страницы: 2

Бренд: Mafell Страницы: 162

Net2Air Ins-40085-US

Бренд: Paxton Страницы: 4

Бренд: ZyXEL Communications Страницы: 215

Бренд: QuickLink Страницы: 8

Easy Tool-ID BSG TID-05-T30-00-005

Бренд: Balluff Страницы: 46

memonizerWORKSTATION

Бренд: MEMON Страницы: 2

Бренд: 1&1 Страницы: 32

WNFB-265AXI(BT)

Бренд: Sparklan Страницы: 14

Бренд: XtendLan Страницы: 52

Бренд: ZyXEL Communications Страницы: 170

Бренд: Tripp Lite Страницы: 3

Bolide BN-NVR/NX

Бренд: GSA Страницы: 101

Threat Analysis Reporter TAR

Бренд: 8e6 Technologies Страницы: 76

RuggedNet 10G/Si

Бренд: OST Страницы: 8

Бренд: peplink Страницы: 111

Threat Analysis Reporter TAR HL/SL/MSA

Бренд: 8e6 Technologies Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды