Eusso UOW2000 Series Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 63

Eusso UOW2000 Series Скачать руководство пользователя страница 62

62

Caution Statement of the FCC Radio Frequency Exposure
This Wireless LAN radio device has been evaluated under FCC Bulletin
OET 65C and found compliant to the requirements as set forth in CFR 47
Sections 2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure
from radio frequency devices. The radiation output power of this
Wireless LAN device is far below the FCC radio frequency exposure
limits.
Nevertheless, this device shall be used in such a manner that the
potential for human contact during normal operation—as a mobile or
portable device but use in a body-worn way is strictly prohibit. When
using this device, a certain separation distance between antenna and
nearby persons has to be kept to ensure RF exposure compliance.

Regulatory information / Disclaimers

Installation and use of this Wireless LAN device must be in strict
accordance with the instructions included in the user documentation
provided with the product. Any changes or modifications (including the
antennas) made to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the equipment.
The manufacturer is not responsible for any radio or television
interference caused by unauthorized modification of this device, or the
substitution of the connecting cables and equipment other than
manufacturer specified. It is the responsibility of the user to correct any
interference caused by such unauthorized modification, substitution or
attachment. Manufacturer and its authorized resellers or distributors
will assume no liability for any damage or violation of government
regulations arising from failing to comply with these guidelines.

«
...
60
61
62
63
»

Содержание UOW2000 Series
































































Отзывы:

Нет отзывов