Eusso UOW2000 Series Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 63

Eusso UOW2000 Series Скачать руководство пользователя страница 61

61

Chapter 7.

Regulatory Compliance Information

15.21

CAUTION: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
15.105 Federal Communications Commission (FCC)
Requirements, Part 15
This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help.

«
...
59
60
61
62
63
»

Содержание UOW2000 Series
































































Отзывы:

Нет отзывов