Eusso 200Mbps Powerline HomePlug, Руководство пользователя

Страница: 14 / 17

3. To secure your network, enter an encryption key in the field “ Encryption Key ”.
Note: When you configure all Powerline Adapters separately, make sure that the
“ Identification Network ” (Network name) and the “ Encryption Key ” are the same for
all adapters.
If one of these settings is different than the other configured Powerline Adapter(s), the
Powerline network will not function!
4. Enter a name for the current Powerline Adapter in the field “ Alias ”.
5. Select the type of Powerline Adapter. If the Powerline Adapter you are configuring is
connected to a router or other gateway device, select “
Access point ”. If the Powerline Adapter
you are configuring is connected to a PC or other client network device on your network,
select “
End point ”.
Note: The type “ End Point ” is selected by default. It is not required to change this
setting, but when your Powerplug is connected to a router or other gateway device, is
it advised to select “
Access point ” so the adapter can handle more data requests.
6. You can secure the configuration of the Powerline Adapter. Enter a password in the field “ New
Password ” and confirm it in the field “ Confirm Password ”.
Note:
The Powerline Adapters are configured with a password by default. This
password is programmed in the Powerline Configurator for easy configuration. If you
change the password, the Powerline Configurator will ask you for the password when
you try to configure it. The default configured password is: “
paterna ” (with small
characters).
7. Click “ Save ” to apply the settings to the selected Powerline Adapter.
When all Powerline Adapters are configured, your Powerline network is ready for use.
5.3 Factory Reset
You can set the Powerline Adapters back to the factory default settings if required.
The option “ Factory Reset ” is protected with a password. The password for a factory reset
is: “ betera ”, with small characters. (This password cannot be changed!)
1. Start the Powerline Configurator with the Desktop shortcut or through the Start Menu. The
main program window will appear.
2. Click “ Next ” to start searching for connected Powerline Adapters.
3. Select “Reset” to show below screen.