background image

11

English

1

2

STORAGE

If the wheelchair is stored for a longer period without being used ( one month or more) it should be 
stored in a clean, moisture-free, room- temperature space. The batteries should be charged approx 
once a month to prevent them from falling to the critical level where the charger no longer starts the 
charging. 

CHARGING THE BATTERIES

To obtain the batteries full performance for as long time as possible it is important that they are being 
charged regularly. Preferably as soon as the wheelchair is parked.The batteries benefits from constant 
charge. The batteries should be charged at least every night if the chair has been used during the day. 
Don´t cancel the charging before it is completed. The charging can be done indoors in your home. Dur-
ing storage the batteries should be charged approx once a month to prevent them from falling to the 
critical level where the charger no longer starts the charging. 

 NOTE! 

 

If the batteries are damaged or leaks, all contact should be avoided to prevent burns. Seek 

immediate contact with the authorized dealer! Used batteries should be sent for recycling.
Connect the charger plug to the joystick on the chair. It is located on the front of the joystick. See pic-
ture. Connect the  charger´s wall socket.Check using the charger lights that the charging has started. 
Information regarding the charger is attached together with the charger. Disconnect the charger when 
the chair is to be used. 

ADJUSTING THE MANEUVER BOX 

The maneuver box can be adjusted in 
depth (1) and sideways (2).  

Adjust all positions with 
an allen key no 5 mm to desired position. 

The maneuver box can be moved both to 
the outside and inside of the armrest. 

1

2

3

4

Содержание Euroflex Reflex





















Отзывы: