7
6
Perform the registration in the vicinity of your FRITZ!Box.
1. Insert the batteries into the unit Comet DECT.
(Explanation can be found on page 7.)
2. Press the button „DECT“ on your FRITZ!Box within
90 seconds. Hold down the button until the light-emitting
diode „Info“ flashes on the FRITZ!Box.
The radio connection is established when the icon in the
display lights up continuously.
3. Now continue with the installation at the radiator.
If the icon is not displayed, the Login was unsuccessful.
Insert the batteries again, and then go to step 2.
Logging on to the FRITZ!Box (automatically)
INFO - Standby Mode
To prolong battery life, the display switches to the
Standby Mode after a few seconds. Pressing any
button wakes up the device.
Remove the battery cover by pressing upwards at the
marked point (1) and unhook (2). Now insert the batteries.
Pay attention to the correct polarity! At a later battery
change, the configuration of your Comet DECT
is maintained.
(1)
(2)
Inserting batteries
MENU
OK
0
24
6
12
18
Comet
DECT
Po
w
er
/
DSL
In
te
rnet
Festnetz
WLAN
In
fo
ca. 10 Sekunden
drücken
Heft-85x120mm-en.indd 6-7
Heft-85x120mm-en.indd 6-7
25.01.2016 15:52:19
25.01.2016 15:52:19
