SCOPE OF DELIVERY
1 x Air Quality Sensor
1 x Stand
1 x Micro-USB-cable
1 x Plug-in power supply
2 x Sticky Tapes
1 x Quick Start Guide
NOTE! Please check the scope of delivery for completeness and intactness.
SAFTEY INSTRUCTIONS
Saftey Instructions
- The Air Quality Sensor is designed for use in buildings.
- Operate the Air Quality Sensor only as described in the user manual.
- The Air Quality Sensor should only be put to use in a dry and dust-free place,
away from direct sunlight.
- Do not keep using the device when there is obvious damage.
- The Air Quality Sensor may not be rebuilt, modified or opened.
- The Air quality Sensor is not to be used as a gas measuring instrument.
WARNING! RISK OF INJURY!
When children play with the thermostat or packaging, they might swallow small
parts and suffocate.
Do not let children play with the thermostat or packaging.
PRODUCT DESCRIPTION
By means of a complex algorithm, an air quality value based on CO
2
-equivalent is
determined from a sum signal of all determined gases and is displayed as a clear
traffic light according to a WHO-compliant scale. While a „very good room air“
(<600 ppm) is indicated by means of a green LED, a red LED warns, if a room needs
to be ventilated urgently.
In addition, the modern metal oxide sensor also measures the VOC value,
interprets it and displays the value as a traffic light. VOC stands for the English
term „volatile organic compounds“. They are gaseous or vaporous substances
that contain carbon. Volatile organic compounds are found for example in cleaning
products, disinfectants, care products (e.g. deodorant or perfume) and building
materials (e.g. paints and varnishes).
This only makes the product an „air quality sensor“ and signals poor air quality
even where simple CO
2
-sensors fail.
COMMISSIONING
Connect the micro-USB-cable to the plug-in power supply and to the Air Quality
Sensor and afterwards to a power outlet. For optimal performance please use the
products which are part of the delivery scope.
When the unit is switched on, the Air Quality Sensor is doing a self-test:
- self-test: Both LED bars run simultaneously two times from the bottom to the top
- sensor-check: each LED bar is blinking two times
- buzzer-test: 3 short clicks of the buzzer
Please confirm at the end by pressing the button on the back of the device.
NOTE:
Afterwards, the device needs approx. 15 minutes for self-calibration. During this
time several alarm displays may occur. Please ignore and confirm them. After
approx. 15 min. the device is ready for use.
Air Quality Sensor
Quick Start Guide
MEANING OF THE COLOURED LEDS
Colour
CO
2
in ppm
VOC in ppb
Air Quality Recommendations
dark
red
> 3000
(Buzzer starts
with 5 Hertz)
> 2200
(Buzzer starts
with 5 Hertz)
unaccep-
table
It must be ventilated immediately.
Use room only when unavoidable.
bright
red
1800-3000
(Buzzer starts
with 2 Hertz)
1600-2200
(Buzzer starts
with 2 Hertz)
low
Increased ventilation is absolutely
necessary.
orange 1000-1800
1000-1600
medium
Ventilation is necessary. Check and
improve ventilation behaviour.
yellow
600-1000
500 - 1000
good
No relevant concerns. Regular
ventilation is recommended.
green
0 - 600
0 - 500
very good
No concerns. No action necessary.
NOTE:
By pressing the button on the back of the device, you can stop the acoustic
signal.
TECHNICAL SPECIFICATIONS
Article
Air Quality Sensor
EAN
4260012712148
Article Number
700209
Supply Voltage
Plug-in power supply
Sensor Type
MOS VOC / CO2-eq
Dimensions
68 x 68 x 17 mm
Weight
48 g
Degree of protection
IP20
Degree of pollution
2
Technical modifications are subject to change. All descriptions for compatibility are without
engagement.
DISPOSAL
From the date of implementation of European guidelines 2002/96/EC and
2006/66/EC into national law, the following applies: Electric and
electronic devices may not be disposed of in house-hold waste. The
consumer is obliged to return electric and electronic devices to the
public collection points established for them or to the point of sale.
Details are regulated by the respective national law.
Dispose of Packaging:
Dispose of the packaging sorted by type. Add paperboard and cardboard
to the waste paper, foils to the recyclables collection.
The symbols on the product, the instruction manual or the packaging refer
to these regulations. By recycling, material utilisation or other forms of utilisation
of old devices, you make an important contribuation to the protection of our
environement.
Delaration of conformity:
Hereby, Eurotronic Techology GmbH declares that the Air Quality Sensor is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of confirmity is available at the following internet address: https://eurotronic.org.
org/service/downloads/.
Warranty
The 24-months warranty period begins at the day of purchase. Please keep the
receipt as evidence of purchase. During the warranty period, defective products
may be sent to your dealer or the address below. Please ensure sufficient postage
is paid. A new or repaired device will then be sent to you free of charge. No new
warranty period begins with the repair or replacement of the device.
After the warranty period has expired, you also have the option of sending the
defective device to the specified address with sufficient postage for repair.
Repairs after the warranty period have expired are subject to a charge. Your
statutory rights are not limited by this warranty.
Contact Information Customer Service:
Eurotronic Technology GmbH
Südweg 1 | 36396 Steinau-Ulmbach | Germany
Telephone: +49 (0) 6667 91847-0
E-Mail: [email protected] | Internet: www.eurotronic.org
Made in Germany
