6
To Finish:
Recheck all the nuts and bolts and ensure they are all tight and that the tricycle is
properly assembled and safe to ride.
Maintenance
Your tricycle is a quality trike that has been constructed using quality components
available from most tricycle retailers. Make it a habit to regularly check that
everything is securely tightened and that your trike is in sound working condition.
Pay particular attention to ensure the handlebars are tight and properly aligned.
Should you find any parts broken or worn please replace them as necessary. With
periodic maintenance and common sense use and care, this tricycle will provide
many years of riding enjoyment for your child.
Warranty Statement
What does this warranty cover?
This warranty covers your new EuroTrike tricycle product
against defects and /or faulty workmanship when used for the purpose intended, under
normal conditions and provided it receives proper care and regular maintenance.
What is excluded from the warranty?
This warranty does not apply to any part or defect
failure brought about by improper assembly, accident, misuse, abuse, neglect, hire or if used
in any commercial situation or normal wear and tear.
How long does the warranty last?
This warranty lasts for 6 months from the date of
purchase on all the component parts and covers the frame for a "Limited Lifetime" being the
usable life of this trike. Should the frame fail at any welded point under normal usage
Eurotrike will replace the frame free of charge (not including freight or labour). This warranty
is extended only to the original purchaser and is not transferable.
What will EuroTrike do if I have a problem?
EuroTrike will provide a replacement part at
no charge for any part found to be defective in workmanship or materials during the warranty
period.
How do I get service if I have a problem?
All claims for warranty must be made to the
dealer from whom this EuroTrike was purchased. Your dealer will contact us and will make
the defective part(s) available for us to look at. All warranty repairs must be authorised by
EuroTrike prior to repairs being made. All claims for warranty must be accompanied by the
original receipt of purchase clearly showing the purchase date and dealer where purchased.
What if a part is missing when I assemble the trike?
A missing part is not handled the
same as a warranty claim. In the event that a part is missing
DO NOT RETURN THE TRIKE
TO THE DEALER
. To get a fast replacement part or service simply call us on the contact
below.
How does state law affect this warranty statement?
This warranty gives you specific legal
rights and you may have other rights which vary from state to state.
Eurotrike is distributed by:
Xero Global Corp Pty Ltd.
ACN 102 784 912
PO Box 184 Thornleigh NSW 2120.
Ph: (02) 9457 6577 Fax: (02) 9457 6599
Email: [email protected]
5
Step 6.
Install the handlebar assembly and front
wheel assembly as per Fig. 6
1. Locate the head parts which consist of a
steel collar with nut and bolt, a large plastic
washer and the plastic collar cover.
2. Insert the front fork assembly into the
frame through the head tube.
3. Ensure the slot in the top of the steerer
tube is towards the rear of the tricycle.
4. Slide the large washer over the top of the
steerer tube and ensure the protruding
locator is housed within the slot on the
steerer tube.
5. Fit the collar with the open end and bolt
facing the rear of the tricycle.
6.Slide the collar cover up onto the
gooseneck of the handlebar assembly and
fit the gooseneck into the top of the fork
steerer tube.
Fig. 6
Fig. 7
Fig. 8
7. NOTE: (There is a minimum insertion mark on the gooseneck of the handlebar
assembly. For safety the handlebars must be inserted into the frame to at least this
minimum insertion mark) When in the proper position, align the handlebars and
tighten the collar bolt until tight using the adjustable wrench.
8. Slide the collar cover down into position to cover the exposed collar.
Step 7.
Install the accessories.
1. For Girlz Talk Girls, install the basket using the straps provided and push the
streamer caps through the holes in the end of the handlebar grips to fit as per Fig. 7
2. For Lowrider Boys install the handle bar pad as in Fig. 8
