M 2700 / MD27
-
Probeer nooit om kortsluiting te maken met een batterij.
-
Gooi batterijen nooit op het vuur, ze riskeren te exploderen.
-
Het opladen van accu’s dient gedaan te worden door volwassenen.
-
Er wordt aangeraden een kind die de batterijen verwisseld te controleren dat de instructies juist worden opgevolgd, of
het verwisselen van de batterijen zelf te doen.
-
Als een batterij ingeslikt wordt, raadpleeg direct een dokter of een vergiftigingen informatie centrum
-
Vergeet niet het apparaat mee te nemen.
MINI DVR CAMERA EN
Warning:
Please read this instruction manual carefully before using the instrument and keep it for future use.
A.
SAFETY INSTRUCTIONS
1.
The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2.
Do not place any part of this appliance in water or any other liquid.
3.
Do not use outdoors.
4.
Do not let the power cord on the edge of a table or work surface, and prevent it comes into contact with hot surfaces.
5.
Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
6.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
7.
This unit is not designed to be operated by means of an external timer or a separate remote control system.
8.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capacities, or by persons lacking in experience or knowledge, unless they are supervised or instructed on the use of
this apparatus by a person responsible for their safety.Children should be supervised to ensure they do not play with
this appliance.
B.
HOW TO USE IT
1)
Recharging
Before the first use, make sure to fully charge the battery
- Plug in the cable into the USB socket ⑥ and connect the cable to a USB power supply or computer
- When the battery is charging, the charging indicator ③ is red, when the ba ery is fully charged, the indicator light ③ is
blue.
When the device run out of battery, the red indicator light ③ will flash for 2 seconds, then the device will turn off. Remove
the SD card and charge your device again.
2)
Installation of the TF card
Note: The camera doesn’t have built-in memory. A memory card must be inserted into the camera before using. After
inserting the memory card, make sure to format the memory card on the camera first.
● When using a newly purchased memory card for the first me, or if data is stored on the memory card but the unit does
not recognize the SD card, format the memory card;
● Before connec ng or disconnec ng the memory card, turn off the device and disconnect it from your computer;
● In any of the following cases, the recorded data may be damaged:
- Misuse of the memory card;
- Disconnecting the power or removing the memory card during recording, deleting (formatting) or playback;
