2. PRODUCT DESCRIPTION
3. BATTERY CHARGING
Charging time for full charge: About 3 hours (Computer)/ About 2 hours (Adapter)
2 ways of charging according to your convenience
Connect the micro USB end of the cable to the plug of the translator.
Connect the other end either to the USB port of
COMPUTER
or to the
ADAPTOR
jack, which should be plugged to the mains.
A few seconds later (10-15 seconds), the battery icon (Fig.2) displays,
indicating the device is charging and then disappears.
Press POWER button to check the capacity of battery (Fig.3) while
charging.
Note : To preserve your battery, please use the device until the battery discharges totally, and
charge at its maximum capacity during the 5 first times of use.
4. ABOUT YOUR TRANSLATOR
The translator needs a WIFI or a GSM network in order to translate. You can choose among these
3 ways of operation
below:
1.
WIFI
code
given by your Internet access provider;
2.
WIFI LINE SHARING
between your mobile phone and the translator;
3.
MICRO SIM CARD
–
Before turning on the device, it should be slipped
under the metallic element (Fig;4) after opening up the translator.
1.
key
2.
Volume
–
key
3.
First language key
4.
Second language key
5.
Microphone
6.
USB charging interface
7.
Power key
8.
Speaker
