S 3002 / AST-300H
Buttons
Functions
MODE
Please check correctly that the device is well plugged.
Press the button ON/OFF during 2 seconds on the device or on the remote
control, a blue light will come out the LCD screen showing the different settings.
Place your feet on the sole place.
Place the electrode pads on the body part you want (except for the chest)
Select the stimulation mode and intensities that you desire.
STOP
Press the button ON/OFF anytime. If there is no weight on the device or if the
electrodes are not placed on the body, the device will turn off automatically.
INTENSITE
99 intensity levels
If you don’t feel anything, do not hesitate to gradually increase the intensity
levels.
CHALEUR
No heat comes out the device.
Auto timer: 25 minutes. Power will turn off automatically after 25 minutes.
Always unplug the AC power cord after use.
To really feel the effect, place the two electrode pads on your own body. If the two electrode pads
are placed on two different bodies, the massage from the electrode pads won’t work.
You can roll your foot sole on the mechanical roll with round picks [6] (please refer to the product
description) for a little extra to your stimulation massage.
Every time when changing the modes, you will have to reprogram the intensity.
TROUBLE-SHOOTING
This page summarizes the most common problems you could encounter with the product :
Problem
Possible Cause
Suggestion
The product does
not work
The product is not plugged in
properly.
Ensure the voltage on the product
corresponds to the local mains
voltage and then plug in again.
The electrode pads are sliding or fell
during the session
Remove them, clean them with a
damp rag and replace them.
The product is likely to be overused.
Unplug the product and let it cool
down before using
it again.
The intensity is weak
Increase slightly the intensities to
be more convenient for you.
A heavy charge was on the product
Reduce the surplus of the charge
and turn it on again.
The skin gets
reddish and
irritated.
The electro pads are stick tightly on
the skin.
Remove them and place them
gently on your skin again.
The electro pads are dirty
Clean them with a damp rag
The device turns
off during the
massage session
The device is not well plugged
Unplugg, plug it again and turn it
on.
The massage session is over
After 25 minutes, the device will
turn off automatically
CARE AND MAINTENANCE
Cleaning
Do not use steel wool, abrasive cleaning agents or corrosive liquids (such as gasoline or acetone) to
clean the product.
1. Unplug the plug from the power outlet.
2. Wipe with a dry cloth to clean the product.
3. Do not use a damp cloth or detergent
Storage
1. Unplug the plug from the power outlet.
2. Store the product in a cool dry place away from sunlight.
3. Do not put a heavy weight load on the product.
If the cover is damaged or there is any mechanical failure, please stop using the product.
Explanation of figures, symbols, warning statements and abbreviations on the
equipment
No. Symbol
Description
1
BATCH CODE. This symbol should be accompanied by batch
code.
Содержание AST-300H
Страница 18: ...S 3002 AST 300H ...