GB
Solar-
Gardentorch “Flame” – 42120
Instruction Manual
Product description:
Solar LED light is a new product to use solar power to produce electricity. During the day,
the solar panel converts solar power into energy and stores in the rechargeable battery. At
light, the light turns on automatically and uses the stored energy. The duration of
illumination will depend on the geographical location, weather conditions and seasonal light
availability.
How to use:
1. Connect long stake and ground stake with the lamp head.
2. Press on/off switch to activate the product. Cover your hand on top of the solar panel. If
the light is on, the device has been activated successfully.
3. Plug the whole product on the ground in the place where you need it.
Additional note:
1. Choose an outdoor location where the solar panel can receive at least 6 hours full and
direct sunshine each day. Shady locations will reduce the battery charge and shorten
the illumination time at night.
2. The solar light is designed to work when the environment gets dark. The selected
location should not be near a light source such as porch light or street light, as these
might keep the solar lights from automatically turning on.
3. The light should be charged 8 hours under the sunlight before use.
4. If there is no good sunlight in 3 months, the battery may be out of power.
5. When the power is low, the light blinks.
Components:
1. Solar panel
2. LED lamp head
3. On/off switch
4. Long stake
5. Ground stake
Electric characteristics
：
1. Solar panel: multi crystal V 150
MAH
2. NI-MH battery: 800mAh AA size
3. Charging time: about 8 hours
4. Working time: about 8 hours
5. Water proof: IP44
6. LED: 96pcs
7. Brightness: about 20 Lumens
8. LED span life: 50,000 Hrs
9. Auto identify day or night
