M740 / WY-S001 12 LEDS Motion Sensor Desk Lamp
Usage instruction
READ THIS INSTRUCTION BEFORE USING IT
I.DESCRIPTION
II. INSERTING BATTERIES
•
This lamp works with 4 C /LR14 type batteries (not included)
•
Open the battery compartment located at the bottom of the
lamp base from the lock symbol
to the unlock symbol
.
•
Insert 4 C batteries (not included), taking care to insert them in
the correct direction shown on the case.
•
Replace the battery compartment and rotate it back to the
locked symbol
to lock it.
III. SPECIFICATIONS
1. Illumination rage
Detection Distance of 15 feet (5 meters) with the detection angle of 60°
2. Detection method
Passive infrared sensor (PIR)
3. Voltage and Batteries
6V DC, 4 C /LR14 cell alkaline or Ni-mH (not included)
4. Light duration
30 seconds
5. Watt
0.825W
6. Lumen
58lm
7. Luminance
6 LED warm lights and 6 LED cold lights
IV. OPERATION
•
Slide the switch to ‘’
‘’ position to turn on cold light version;
•
Slide the switch to ‘’
‘’ position to turn on the warm light
version;
•
Slide the switch to ‘’
‘’ position to turn on the Motion Sensor
version;
Attention: This function could only be used in the
darkness.
•
Slide the switch to “
” position to turn off the light.
