4
8. If the Foil needs replacing, slide the new Foil into the Foil
Holder so that small hole in the centre of the Foil slides over
the small tab in the middle of the Foil Holder cross bar. This
will hold the foil in place.
9.
Slide the Shaver housing into the Foil Holder until it snaps into
place.
10.
Slide the Cover onto Shaver head.
REMOVING THE BATTERY
1.
By law, the battery must be removed from the housing before
the Shaver is disposed of.
2.
Use a screwdriver to unscrew the Shaver Head from the top of
the housing.
3.
Peel off the label from the under the housing and unscrew the
housing.
4.
Remove the front panel off the Power Switch and remove the
screw from the front panel.
5.
Slide the battery holder out of housing. Remove and dispose of
the battery.
DISPOSAL
：
The packaging material is reusable. Dispose of the packaging in an
environmentally friendly way by putting it in the appropriate
recyclable waste collection containers.
Dispose of the product and the batteries in view of
the environment if you want to separate. The device
and the batteries must not be thrown in with domestic
waste. Take them to a recycling center for used
electrical
and
electronic
devices.
For
more
information you can consult your local government.
Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany 0180 . 530 63 63* or
in Austria
in Switzerland 044 . 28 36 125 or
in the Netherlands 026 . 37 36 333 or
in France
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone
network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return
address stated on your invoice.
The manual only reflects the technical conditions available under
printing. Any changes in technology and equipment are reserved.
© 18.09.2013
